Clarion DXZ675USB, Руководство пользователя

Страница: 15 / 39

Basic Operations
English
13
DXZ675USB
3-1. Push the [ P.CH ] button upward or
downward to adjust the gain, the FREQ
(center frequency) and the Q.
BASS GAIN : +7 to –7 (The factory default
setting is “ 0 ”)
BASS FREQ : 50Hz/80Hz/120Hz (The
factory default setting is “ 50 ”)
BASS Q : 1/1.25/1.5/2 (The factory default
setting is “ 1 ”)
3-2. Press the [ ] button to return to the
previous mode.
●
Adjusting the treble
The treble gain and treble FREQ (center
frequency) can be adjusted as follows.
The adjustment can only be performed when
the DZE is set to “
DZE OFF ”.
2-1. Select “ TREBLE ”.
2-2. Press the [ ] button.
2-3. Push the [ SEEK PANEL ] leftward or
rightward and select from:
“
TREB GAIN ”
↔
“ TREB FREQ ”
3-1. Push the [ P.CH ] button upward or
downward to adjust the gain and FREQ
(center frequency).
TREB GAIN : +6 to –6 (The factory default
setting is “ 0 ”)
TREB FREQ : 8KHz/12KHz (The factory
default setting is “ 12K ”)
3-2. Press the [ ] button to return to the
previous mode.
●
Adjusting the sound restorer
The sound restorer enriches the playback of all
types of music files that have undergone any
level of data compression.
2-1. Select “ S RESTORER ”.
3-1. Push the [ P.CH ] button upward or
downward to adjust.
Each time you push the [ P.CH ] button, the
sound restorer changes in the following
order:
“ OFF ”
↔
“ 1 ”
↔
“ 2 ”
↔
“ 3 ”
∗
The factory default setting is “ OFF ”.
Set this adjustment in accordance with the
music source used
OFF: For music sources compressed at
high bit rate
1: For music sources compressed for high
quality at low bit rate
2: For music sources compressed for
standard quality at low bit rate
3: For music sources compressed for low
quality at low bit rate
●
Setting high pass filter
2-1. Select “ HPF ”.
3-1. Push the [ P.CH ] button upward or
downward to select the setting. Each time
you push the [
P.CH ] button, the setting
changes in the following order:
“ THRGH”
↔
“50Hz”
↔
“80Hz”
↔
“120Hz”
∗
The factory default setting is “THRGH”
(through).
●
Setting low pass filter
2-1. Select “S-W LPF”.
3-1. Push the [P.CH] button upward or
downward to select the setting.
Each time you push the [P.CH] button, the
setting changes in the following order:
“THRGH”
↔
“50Hz”
↔
“80Hz”
↔
“120Hz”
∗
The factory default setting is “THRGH”
(through).
●
Adjusting the balance
2-1. Select “BALANCE”.
3-1. Push the [P.CH] button upward to
emphasize the sound from the right
speaker, push the button downward to
emphasize the sound from the left speaker.
∗
The factory default setting is “0”.
(Adjustment range: L12 to R12)
●
Adjusting the fader
2-1. Select “FADER”.
3-1. Push the [P.CH] button upward to
emphasize the sound from the front
speaker, push the button downward to
emphasize the sound from the rear
speaker.
∗
The factory default setting is “0”.
(Adjustment range: R12 to F12)
DXZ675USB_EN.book 13 ページ ２００６年１２月２５日 月曜日 午前１１時２１分