16
DXZ668RMP
280-8330-00
English
Basic Operations
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the MAGNA BASS
EXTEND effect.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect.
∗
The factory default setting is off.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time.
∗
If a CT data is not being received, “– –:– –CT”
appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS and PTY appears
in the display.
∗
PS: Programme service name
∗
PTY: Programme type
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
F1 (FM1)
➜
F2 (FM2)
➜
F3 (FM3)
➜
A (MW/
LW)
➜
F1 (FM1)...
3. Press the [
å
,
∂
] lever upward or
downward to tune in the desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [BND] button and select the
desired band (FM or AM (MW, LW)).
2. Tune into a station.
∗
If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
∗
If “TA” is lit in the display, TP stations are
automatically sought.
●
DX SEEK
Press the [
å
,
∂
] lever upward or downward
to start automatic station tuning.
When the lever is pressed upward, search will
be performing in the direction of higher
frequencies. When the lever is pressed
downward, search will be performed in the
direction of lower frequencies.
∗
When seek tuning starts, “DX SEEK” appears in
the display.
