Clarion DXZ656MP, Руководство пользователя

Страница: 22 / 29

22
DXZ656MP
280-8166-00
English
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
●
Setting the Subwoofer
You can set the subwoofer on or off.
∗
The factory default setting is “ ON ”.
2-1. Select “ SUB-W ”.
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
●
Setting LOW PASS FILTER
∗
The factory default setting is “ THROUGH ”.
∗
If subwoofer function is set “ ON ”, “ LOW PASS
FILTER ” can be selected.
2-1. Select “ SUB-W LPF ”.
3-1. Turn the [ ROTARY ] knob to select the
setting. Each time you turn the [ ROTARY ]
knob, the setting changes in the following
order:
THROUGH
➜
50
➜
80
➜
120
●
Setting the external amplifier
∗
The factory default setting is “ OFF ”.
2-1. Select “ AMP CANCEL” .
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
●
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗
The factory default setting is “ MID ”.
2-1. Select “ AUX SENS ”.
3-1. Turn the [ ROTARY ] knob to select “ LOW ”,
“ MID ” or “ HIGH ”.
●
Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “ SYSTEM CHECK ”.
3-1. Press and hold the [ ] button for 1
second or longer.
“ SYSTEM CHECK ” appears in the display,
then the unit returns to the previous
operation mode.
∗
This setting item can be adjusted within the
range SPEED 1 to SPEED 6.
Adjust this setting item while viewing how the
appearance of the display changes.
●
Dimmer level
You can adjust the reduced illumination level of
the dimmer.
∗
The factory default setting is “ LV3 ”.
(Adjustment range is LV1 to LV5)
2-1. Select “ DIMMER LV ”.
3-1. Turn the [ ROTARY ] knob to adjust the
reduced illumination level of the dimmer.
●
LV1 to LV5:
The dimmer operation is performed
depending on the set level LV1 to LV5.
●
OFF:
No dimmer operation is performed.
●
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗
The factory default setting is “ 08 ”. (Adjustment level:
01 to 16)
2-1. Select “ CONTRAST” .
3-1. Turn the [ ROTARY ] knob to adjust the
contrast.
To change other settings
1. Press the [ ADJ ] button to switch to the
adjustment selection display.
2. Press the [
a
,
d
] lever upward or
downward to select the “ item name ”.
Each time the [
a
,
d
] lever is pressed up/
down, the item display changes in the
following order:
“BLINK LED”
↔
“SUB-W”
↔
“SUB-W
LPF”
↔
“AMP CANCEL”
↔
“AUX SENS”
↔
“SYSTEM CHECK”
3. Turn the [ ROTARY ] knob to select the
“ desired setting item ”.
∗
After completing settings, press the [ ADJ ]
button to return to the previous mode.
●
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
2-1. Select “ BLINK LED ”.
Operations Common to Each Mode