280-8047-00
DXZ646MP
23
English
Dimmer control
You can set the dimmer control “
ON
” or “
OFF
”.
∗
The factory default setting is “
ON
”.
1. Press and hold the [
T
] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“
DIMMER
”.
3. Turn the [
ROTARY
] knob clockwise to “
ON
”
or counterclockwise to “
OFF
”.
4. Press the [
T
] button to return to the previous
mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗
The factory default setting is “
8
”. (Adjustment level:
1 to 16)
1. Press and hold the [
T
] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“
CONTRAST
”.
3. Turn the [
ROTARY
] knob clockwise or coun-
terclockwise to adjust the contrast.
4. Press the [
T
] button to return to the previous
mode.
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
∗
The factory default setting is “
OFF
”.
1. Press and hold the [
T
] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button and select
“
BLINK LED
”.
3. Turn the [
ROTARY
] knob clockwise to set
this function “
ON
” or turn it counterclockwise
to switch this function “
OFF
”.
4. Press the [
T
] button to return to the previous
mode.
Operations Common to Each Mode
Setting the sub woofer
You can set the sub-woofer on or off.
∗
The factory default setting is “
ON
”.
1. Press and hold the [
T
] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button and select
“
SUB-WOOFER
”.
3. Turn the [
ROTARY
] knob clockwise to “
ON
”
or counterclockwise to “
OFF
”.
4. Press the [
T
] button to return to the previous
mode.
Setting LOW PASS FILTER
∗
If sub-woofer function is set “
ON
”, “
LOW PASS FIL-
TER
” can be selected.
∗
The factory default setting is “
LPF THRGH
”.
1. Press and hold the [
T
] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“SUB-W LPF”
.
3. Turn the [
ROTARY
] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [
ROTARY
] knob, the setting
changes in the following order:
LPF THRGH
➜
LPF 50Hz
➜
LPF 80Hz
➜
LPF 120Hz
4. Press the [
T
] button to return to the previous
mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗
The factory default setting is “
MID
”.
1. Press and hold the [
T
] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [
a
] or [
d
] button to select
“
AUX SENS
”.
3. Turn the [
ROTARY
] knob clockwise or coun-
terclockwise as needed and select from
“
HIGH
”, “
MID
” or “
LOW
”.
4. Press the [
T
] button to return to the previous
mode.
+DXZ646MP-009-ENG
03.12.26, 5:03 PM
Page 23
Adobe PageMaker 6.5J/PPC