Clarion DXZ585USB, Руководство пользователя

Страница: 16 / 41

Basic Operations
English
16
DXZ585USB
●
Adjusting the treble
The treble gain and treble FREQ (center
frequency) can be adjusted as follows.
The adjustment can only be performed when the
DZE is set to “
DZE OFF ”.
2-1. Select “ TREBLE ”.
2-2. Press the [ ] button.
2-3. Push the [ SEEK PANEL ] leftward or
rightward and select from:
“
T GAIN ”
↔
“ T FREQ ”
3-1. Press the [ UP ] or [ DN ] button to adjust the
gain and FREQ (center frequency).
T GAIN : –6 to +6 (The factory default
setting is “ 0 ”)
T FREQ : 8KHz/12KHz (The factory default
setting is “ 12K ”)
3-2. Press the [ ] button to return to the
previous mode.
●
Adjusting the sound restorer
The sound restorer enriches the playback of all
types of music files that have undergone any
level of data compression.
2-1. Select “ S RESTOR ”.
3-1. Press the [ UP ] or [ DN ] button to adjust.
Each time you press the [ UP ] or [ DN ]
button, the sound restorer changes in the
following order:
“ OFF ”
↔
“ 1 ”
↔
“ 2 ”
↔
“ 3 ”
∗
The factory default setting is “ OFF ”.
Set this adjustment in accordance with the
music source used.
OFF: For music sources compressed at
high bit rate
1: For music sources compressed for high
quality at low bit rate
2: For music sources compressed for
standard quality at low bit rate
3: For music sources compressed for low
quality at low bit rate
●
Setting high pass filter
2-1. Select “ HPF ”.
3-1. Press the [ UP ] or [ DN ] button to select the
setting. Each time you press the [
UP
] or
[ DN ] button, the setting changes in the
following order:
“ THROUGH ”
↔
“ 50Hz ”
↔
“ 80Hz ”
↔
“ 120Hz ”
∗
The factory default setting is “ THROUGH ”
(through).
●
Setting low pass filter
2-1. Select “ S-W LPF ”.
3-1. Press the [ UP ] or [ DN ] button to select the
setting.
Each time you press the [ UP ] or [ DN ]
button, the setting changes in the following
order:
“ THROUGH ”
↔
“ 50Hz ”
↔
“ 80Hz ”
↔
“ 120Hz ”
∗
The factory default setting is “ THROUGH ”
(through).
●
Adjusting the balance
2-1. Select “ BALANCE ”.
3-1. Press the [ UP ] button to emphasize the
sound from the right speaker, press the
[
DN ] button to emphasize the sound from
the left speaker.
∗
The factory default setting is “
CENTER
”.
(Adjustment range: L12 to R12)
●
Adjusting the fader
2-1. Select “
FADER
”.
3-1. Press the [ UP ] button to emphasize the
sound from the front speaker, press the
[
DN ] button to emphasize the sound from
the rear speaker.
∗
The factory default setting is “ CENTER ”.
(Adjustment range: R12 to F12)