Clarion DXZ388RUSB, Руководство пользователя

Страница: 15 / 43

Basic Operations
English
15
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
●
Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer Plus is set to “
CUSTOM ”.
2-1. Select “ TREBLE ”.
3-1. Press the [
w
] or [
z
] button to select as
following order.
“ TREB(G) ”
↔
“ TREB(F) ”
∗
The factory default setting is “ TREB(G) ”.
3-2. Press the [ ] button.
3-3. Press the [
w
] or [
z
] button to select the
setting.
TREB(G) : The factory default setting is “ 0 ”.
(Adjustment range: +7 to – 7)
TREB(F) : The factory default setting is
“ 10K ”.
(Adjustment range:
10K/12.5K/15K/17.5K)
3-4. Press the [ ] button to return to the
previous mode.
●
Adjusting the balance
2-1. Select “ BALANCE ”.
3-1. Press the [
w
] or [
z
] button to adjust the
balance of the right and left speakers.
∗
The factory default setting is “ CENTER ”
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
●
Adjusting the fader
2-1. Select “ FADER ”.
3-1. Press the [
w
] or [
z
] button to adjust the
balance of the rear and front speakers.
∗
The factory default setting is “ CENTER ”
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
●
Adjusting the subwoofer
You can set the low pass filter of subwoofer.
2-1. Select “ S-W LPF ”.
3-1. Press the [
w
] or [
z
] button to select as
following order.
“ THROUGH ”
↔
“ LPF 50 ”
↔
“ LPF 80 ”
↔
“ LPF 120 ”
∗
The factory default setting is “ THROUGH ”.
●
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit's
subwoofer output terminal.
2-1. Select “ S-W VOL ”.
3-1. Press the [
w
] or [
z
] button to increases
or decreases the subwoofer volume.
∗
The factory default setting is “ 0 ”.
(Adjustment range: +6 to –6)
∗
When the volume level is more than 30, the
subwoofer volume adjustment value can not
reach +6.
●
Adjusting the HPF
2-1. Select “ HPF ”.
3-1. Press the [
w
] or [
z
] button to select as
following order.
“ 120 ”
↔
“ THROUGH ”
∗
The factory default setting is “ THROUGH ”.
∗
This is supported only with amplifiers
equipped with this function. Output is not
supported from RCA cables.
Note:
• During SOUND adjustment mode, if no
operation is performed for more than 10
seconds, this mode can be cancelled and return
to previous mode.