Clarion DUZ385SAT, Руководство пользователя

Страница: 17 / 41

English
17
DUZ385SAT
XM Satellite Radio Operations
This unit can control the satellite radio receiver
(XM Mini-Tuner).
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by
the following notations:
“XM”: for an XM Satellite Radio
Selecting a Satellite Radio mode
1. Press the [
SRC
] button.
The system changes to the specified
Satellite Radio mode.
Selecting a band
1. Press the [ BND ] button to select a band.
This changes the reception band as follows:
XM1
➜
XM2
➜
XM3
➜
XM1 ...
●
Information displayed during reception
The following information is displayed when the
satellite radio cannot be received normally.
• When the antenna is not be connected :
“ CHECK ANTENNA ”
• When the mini tuner is not be connected :
“
CHECK XM TUNER
”
• When no signal is received: “ NO SIGNAL ”
• When a channel is being tuned in (no signal is
yet received): “ LOADING ”
• A channel without a broadcast has been
selected: “ OFF AIR ”
• An unviable channel has been selected:
“ CH UNAVL ”
• A channel not covered by your contract:
“ UNAUTH ”
Confirming your XM ID
1. Press the [
x
] or [
v
] button to switch to
channel 0.
2. The XM ID No. appears in the display.
Displaying channel labels
1. Press the [ DISP ] button to select the desired
channel label.
Channel
➜
Category
➜
Name (Title)
➜
Channel...
Channel input directly
T his function allows you to input the channel
No. directly.
1. Press and hold the [ DISP ] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [
x
] or [
v
] button to select
“ CHANNEL ”.
3. Press the [ ] button.
4. Press the [
w
] or [
z
] button to input the
channel No.
5. Press and hold the [ ] button for 1 second
or longer to select the channel.
Setting channel tuning
This function allows you to tuning a channel
directly or indirectly.
∗
The factory default setting is
“ OFF
”
.
1. Press and hold the “ DISP ” button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [
x
] or [
v
] button to select
“ DIRECT ”.
3. Press the [
w
] or [
z
] button to select “ ON ”
or “ OFF ”.
• ON:
Press the [ ] button to switch to another
channel after tuning operations. Otherwise,
the operation will switch to the other
channel automatically after 2 seconds.
• OFF:
Press the [ ] button to switch to another
channel after tuning operations. Otherwise,
the operation will return to the previous
channel after 5 seconds.
Channel selection
1. Channels are selected with the [
x
] or
[
v
] button.
For details, see the following operation
descriptions.
Note:
The audio output is muted and other button
operations are not accepted during channel
selection.
DUZ385SAT_EN.book Page 17 Friday, November 23, 2007 7:49 PM