background image

DRX6575z

4

DRX6575z

3

8

DRX6575z

Use only compact discs bearing the 

 mark.

Do not play heart-shaped, octagonal, or other specially shaped compact discs.

2. PRECAUTIONS

1. When the inside of the car is very cold and

the player is used soon after switching on
the heater moisture may form on the disc or
the optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear natu-
rally allowing normal operation.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the sound
to skip.

This equipment has been tested and found to
comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reason-
able protection against harmful interference in
a residential installation.

This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications. However, there is no guarantee
that interference will not occur in a particular
installation.

If this equipment does cause harmful interfer-
ence to radio or television reception, which can
be determined by turning the equipment off and
on, the user is encouraged to consult the dealer
or an experienced radio/TV technician for help.

3. When the auto antenna cord is connected to

the car auto antenna cord, when the unit is
switched to the radio mode (or the TV mode),
the antenna is extended automatically. If the
car is in a narrow space, the antenna may
strike something, so be careful.

4. This unit uses a precision mechanism. Even

in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.

CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY RE-
SULT IN HAZARDOUS RADIATION EXPO-
SURE.

THE COMPACT DISC PLAYER and MINI DISC
PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.

CHANGES OR MODIFICATIONS NOT EX-
PRESSLY APPROVED BY THE MANUFAC-
TURER FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.

 INFORMATION FOR USERS:

.

CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU-
FACTURER WILL VOID THE WARRANTY
AND WILL VIOLATE FCC APPROVAL.

Handling Compact Discs

Handling

• New discs may have some roughness around

the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any rough-
ness from the edge of the disc.

Ball-point pen

Roughness

• Never stick labels on the surface of the com-

pact disc or mark the surface with a pencil or
pen.

• Never play a compact disc with any cellophane

tape or other glue on it or with peeling off marks.
If you try to play such a compact disc, you may
not be able to get it back out of the CD player
or it may damage the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or dam-
age.

• To remove a compact disc from its storage

case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.

• Do not use commercially available CD protec-

tion sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.

Storage

• Do not expose compact discs to direct sun-

light or any heat source.

• Do not expose compact discs to excess hu-

midity or dust.

• Do not expose compact discs to direct heat

from heaters.

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the cen-
ter of the compact disc to the circumference.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray or thinner
to clean compact discs.

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

Flip Down Panel

The DRX6575z uses a flip-down structure that makes possible large-size displays.

CAUTION

When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.

1. Always use the DRX6575z with the FLIP

DOWN PANEL closed.

2. Do not force operations or use this device

abnormally when opening or closing the FLIP
DOWN PANEL.

3. Do not use the FLIP DOWN PANEL as a tray

to place objects on when it is open.

4. When closing the FLIP DOWN PANEL, do not

press OPEN button 

1

.

5. Strong impacts to the operating or display

section can cause damage or deformation.

6. If the FLIP DOWN PANEL does not open fully,

gently open it with your hand.

Be sure to unfold and read the next page.

Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

Inserting the Batteries

1. Turn the remote control unit over, then slide

the rear cover in the direction of the arrow.

2. Insert the AA (UM-3/1.5V) batteries that came

with the remote control unit facing in the di-
rections shown in the figure, then close the
rear cover.

Notes:

Using batteries improperly can cause them to ex-
plode. Take note of the following points:

When replacing batteries, replace both batteries
with new ones.

Do not short-circuit, disassemble or heat batteries.

Do not dispose of batteries into fire or water.

Dispose of spent batteries properly.

6. REMOTE CONTROL

Remote control unit

Rear side

AA (UM-3/1.5V)
Batteries

Rear cover

Receiver for remote control unit

Signal transmitter

Operating range: 30

°

 in all directions

Bottom View of Source Unit

286-         

Clarion Co.,Ltd.

MADE IN 

MODEL

12V      GROUND

AM 530-1710kHz/FM 87.9-107.9 MHz

SERIAL No.

PE-

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDI-
TIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER-
ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTER-
FERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY 
CAUSE UNDESIRED OPERATION.

THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR 
SUB-CHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CLARION CO., LTD.
50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN.

MANUFACTURED:

Содержание DRX6575z





















Отзывы: