background image

English

7

CZ703E

Basic Operations

Volume adjustment

Rotate the [

VOLUME

] knob on the front 

panel or press the [   ] or [ 

 

] button on the 

remote control.

The adjustable range of volume is 0 to 40.

CAUTION

While driving, keep the volume level at 
which external sounds can still be heard.

Playing source selection

Press [

SRC /   

] button on the front panel or 

remote control repeatedly to choose desired 

playing source.

Note:

Playing source selection means selecting 

which mode, such as 

DISC

 mode, 

RADIO 

mode and 

AUX

 mode.

Display system time

Press the [

DISP

] button on the front panel 

or [

DISP

] button on the remote control to 

switch the display information from clock, 

station information (

RADIO

 mode), or track 

information (

CD

 mode).

System Setup

In any mode, press and hold 

[ DISP ]

 button 

to enter system setup. Press [ 

 ] or [ 

 ] 

button to select options, rotate the

 [VOLUME] 

knob to adjust.

AF: ON/OFF (RADIO mode)

Rotate the 

[VOLUME]

 knob to choose AF 

oN 

or off.

REG: ON/OFF (RADIO mode)

Rotate the 

[VOLUME]

 knob to choose REG 

oN or off.

DX/LO (RADIO mode)

Rotate the 

[VOLUME]

 knob to choose radio 

local or distant at radio mode.

• 

LO

: Only stations with strong signal can be 

received.

• 

DX

: Stations with strong and weak signals 

can be received.

AUX SENS (AUX mode)

Rotate the 

[VOLUME]

 knob to choose AUX Input 

sensitivity LOW, MID or HIGH at 

AUX

 mode.

SELECT (BT mode)

T h i s   “

S E L E C T

”   m e n u   i s   i n t e n d e d   t o 

automatically paired by selecting a mobile 

phone was stored.

This unit can store three mobile phones. The 

mobile phone will be stored in paired order 

to the unit. The fourth mobile phone can not 

be stored. If you want to store a fourth mobile 

phone, please delete unwanted mobile phone 

from “

DELETE

” menu.

1.   Rotate the [

VOLUME

] knob to choose the 

paired mobile phone name from the pairing 

list.

2.   Press  and  hold  the  [

VOLUME

]  knob  to 

confirm.

RESET

If  you  have  following  problems,  pls  press 

[

RESET

] button.

• Unit can not power on

• Nothing happens when buttons are pressed

• Display is not accurate

Note:

* When the [

RESET

] button is pressed, 

preset radio stations, titles, etc. stored in 

memory are cleared.

RESET

To keep the current sound settings, when 

power on first time after reset, rotate the 

[

VOLUME

knob to select “

LOAD

”, press the 

knob to confirm.

System Setup

DELETE (BT mode)

1.   Rotate the [

VOLUME

] knob to choose the 

paired mobile phone name from the pairing 

list.

2.   Press  and  hold  the  [

VOLUME

]  knob  to 

confirm. 

DISCONNECT (BT mode)

Disconnect currently connected mobile phone.

1.   Rotate the [

VOLUME

] knob, mobile phone 

displays are currently connected.

2.   Press  and  hold  the  [

VOLUME

]  knob  to 

disconnect.

MIC GAIN (BT mode)

Rotate the 

[VOLUME]

 knob to choose

 

Mic 

gain: -5,-4,-3,-2,-1,0,1, 2, 3, 4, 5.

You  can  change  the  gain  of  MIC  when  a 

telephone partner cannot hear your voice.

You can listen to your telephone calls from 

the speakers connected to this unit. 

*  When  listening  to  your  calls  on  your  

car speakers,  you  can  adjust  the  volume  

by turning the [

VOLUME

] knob. 

MIC SEL (BT mode)

Rotate  the 

[ V OLU M E ]

  knob  to  choose 

Microphone EXTERNAL or INTERNAL.

TONE SEL (BT mode)

You can get mobile phone ring tone from the 

speaker.

Rotate the [

VOLUME

] knob to choose  AUTO 

or INTERNAL.

• 

AUTO

:

Mobile phone ring tone from the speaker.

• 

INTERNAL

:

The unit original ring tone from the speaker.

AUTO ANS (BT mode)

To answer incoming calls automatically.

Rotate the [

VOLUME

] knob to choose  AUTO 

ANS oN or off.

AUTO  CON: ON/OFF (BT mode)

Automatically connects the mobile phone was 

last connected.

Rotate the [

VOLUME

] knob to choose  AUTO 

CON ON or OFF.

PIN CODE 

Rotate  and  press  the  [

V O L U M E

]  knob 

to  choose  a  4-digit  password.  Press  the 

[

VOLUME

]  knob  more  than  1  seconds  to 

confirm.

The PIN CODE default setting is “ 

0000

 ”.

COLOR

Rotate  the 

[ V O L U M E ]

  knob  to  choose 

backlight color.

SCN

: The backlight change circularly.

COLOR 01~09

: Select a preset color.

USER1~3

: Select your favorite color. Press 

the knob to enter color setting mode, press 

 

 ] or [ 

 ] button to select GREEN, BLUE 

or  RED,  the  rotate  the  [

VOLUME

]  knob  to 

select a color.

Press and hold [ 

VOLUME

 ] knob to memory.

SCRN SVR: ON/OFF

Rotate the 

[VOLUME]

 knob to choose SCRN 

SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the 

display panel:

When SCROLL is ON, the LCD will display 

ID3  TAG  information  cyclely,  e.g:  TRACK-

> F O L D E R - > F I L E - > A L B U M - > T I T L E -

>ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display 

one of the ID3 TAG information, the default 

is TRACK, but user can adjust it to other ID3 

TAG information by press 

[ DISP ]

 button.

S-CTRL (iPod mode) : ON/OFF

Rotate the 

[VOLUME]

 knob to choose S-CTRL 

(Simple Control)  ON or OFF.

*  Refer to Page 12.

TEL-SW

Rotate the [

VOLUME

] knob to choose MUTE, 

oN or off. 

•   

MUTE

The  sound  from  this  unit  is  muted  during 

telephone calls. 

•  

 OFF

This unit continues normal operation even 

when the cellular phone is used. 

Содержание CZ703E





















Отзывы: