English
8
CZ702E
Audio Setup
Audio Setup
Selecting speaker
When this product is turned on for the first
time or reseted. Rotate the
[VOLUME]
knob to select the [
INITIAL
] and press
the
[VOLUME]
knob, then press [
]
or [
] button to select :
NORMAL / 2-WAY
/3-WAY
,
it allows you to select a speaker
system.
Speaker system
Speaker system Speaker configuration
NORMAL
front 2ch
Rear 2ch Subwoofer 2ch
2-WAY
Mid 2ch
High 2ch
Rear 2ch
3-WAY
Mid 2ch
High 2ch
Subwoofer 2ch
System Setup
•
ON
:
You can listen to your telephone calls from
the speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the [
VOLUME
] knob.
A-CANCEL: ON/OFF
Rotate the
[VOLUME]
knob to choose
Amplifier-Cancel function ON or OFF.
If you don’t use internal amplifier, set it to ON.
DIMMER: ON/OFF
Rotate the
[VOLUME]
knob to choose
DIMMER
oN or off.
•
ON
: LCD dimmer is active when small light
of vehicle is turned ON.
•
OFF
: LCD always maximum brightness
regardless of the vehicle small light.
BEEP: ON/OFF
Rotate the
[VOLUME]
knob to choose button
beep sound ON or OFF.
SVC LINK
Rotate the
[VOLUME]
knob to choose Service
Link mode.
•
DAB-DAB
: Switches to a different
frequency DAB station on the same network
if current DAB station signal becomes weak.
•
DAB-FM
: Switches to a different frequency
FM station on the same network if current
DAB station signal becomes weak.
•
DAB&FM
: S w i t c h e s t o a d i f f e r e n t
frequency DAB station or FM station on the
same network if current DAB station signal
becomes weak.
•
OFF
: No switch.
Note:
If you wish to use the SERVICE LINK, please
set to ON the AF function.
DAB LBND: ON/OFF
When you want to listen DAB L-BAND(At
the region support DAB L-BAND), stations,
please set to ON.
Rotate the
[VOLUME]
knob to choose
L-BAND ON or OFF.
•
Normal speaker system (NORMAL)
Front speaker
(left)
Rear speaker
(left)
Subwoofer
Front speaker
(right)
Rear speaker
(right)
•
2way speaker system (2WAY)
Mid speaker
(left)
High (Tweeter)
(left)
Rear speaker
(left)
Mid speaker
(right)
High (Tweeter)
(right)
Rear speaker
(right)
•
3way speaker system (3WAY)
Mid speaker
(left)
High (Tweeter)
(left)
Subwoofer
Mid speaker
(right)
High (Tweeter)
(right)
Setting the X-OVER(Crossover)
This function allows you to adjust the speaker
setting such as cutoff frequencies or slope
matched to the speakers you are using.
(Crossover).
Press and hold the
[ ]
button to enter
amplifier setting mode. Use the [
] or [
]
button to select an option.
Press [
VOLUME
] knob to confirm.
To return to the previous settings, press the
[ VOLUME ]
knob again.
1. When speaker system is
“NORMAL”.
• TIME ALIGNMENT
FRONT L/R: 0----501.4cm
REAR L/R: 0----501.4cm
SW L/R: 0----501.4cm
•
HPF/LPF FRONT
- FR HPF
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
•
HPF/LPF REAR
- REAR HPF
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
• HPF/LPF S-WOOFER
- SW LPH
CUT: THROUGH / 60 / 90 / 120HZ
SLOP: -12DB
PHASE: NOR / REV
2. When speaker system is “2WAY”.
• TIME ALIGNMENT
HIGH L/R: 0----501.4cm
MID L/R: 0----501.4cm
REAR L/R: 0----501.4cm
• 2W XOVER
- HIGH HPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ / 100HZ / 125HZ / 160HZ /
200HZ / 250HZ / 315HZ / 400HZ / 500HZ
/ 630HZ / 800HZ / 1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ 12.5K / 16K / 20K / THROUGH
SLOP: -6 / -12DB
- HIGH SPK: PHASE NOR/PHASE REV
- MID LPF
CUT: 630HZ / 800HZ / 1K / 1.25K / 1.6K
/ 2K / 2.5K / 3.15K / 4K / 5K / 6.3K / 8K /
10.0K / THROUGH
SLOP: -6 / -12DB
- MID HPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ /1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ THROUGH
SLOP: -6 / -12DB
- MID SPK: PHASE NOR/PHASE REV
- REAR LPF
CUT: 25HZ / 31.5HZ / 40HZ / 50HZ /
63HZ / 80HZ / 100HZ / 125HZ / 160HZ /
200HZ / 250HZ / 315HZ / 400HZ / 500HZ
/ 630HZ / 800HZ / 1K / 1.25K / 1.6K / 2K /
2.5K / 3.15K / 4K / 5K / 6.3K / 8K / 10.0K
/ THROUGH
SLOP: -6 / -12DB
- REAR HPF
CUT: 16HZ / 20HZ / 25HZ / 31.5HZ /
40HZ / 50HZ / 63HZ / 80HZ / 100HZ
/ 125HZ / 160HZ / 200HZ / 250HZ /
THROUGH
