Clarion CZ509E, Руководство пользователя

Страница: 11 / 36

Basic Operations
En
g
lish
11
CZ509E/CZ509ER/CZ509EG
When “CUSTOM” is set:
3-1. Press the [ ] button.
3-2. Press the [
x
] or [
v
] button to select the
“ BASS ”/“ MID ”/“ TREBLE ” mode to adjust.
3-3. If you want to set the flat, press the [ ]
button to return to the “ CUSTOM ” mode,
then press and hold the [ ] button (1 sec.) ,
bass/mid/treble characteristics become flat.
When “EXCITE/IMPACT/B-BOOST” is set:
3-2. Press the [ ] button.
3-3. Press the [ ] or [ ] button to adjust the
setting in the range of
–
3 to +3.
∗
The factory default setting is “ 0 ”.
3-4. Press the [ ] button to return to the
previous mode.
●
Adjustin g the BASS/MID/TREBLE
This adjustment can be performed only when
the BEAT EQ is set to “
CUSTOM ”.
Note:
• While connected with the external aplifers,
please do not set the “ BA SS ”/“ MID ”/“ TREBLE ”
in the maximum level. Otherwise the speakers
may be damaged.
3-2. Press the [ ] button.
3-3. Press the [
x
] or [
v
] button to select as
following order.
“ BASS<G> ”
↔
“ BASS<F> ”
↔
“ BASS<Q> ”
“
MID<G>
”
↔
“
MID<F>
”
↔
“
MID<Q>
”
“
TREBLE<G>
”
↔
“
TREBLE<F>
”
↔
“
TREBLE<Q>
”
∗
The factory default setting is “ BASS<G> ”.
3-4. Press the [ ] or [ ] button to select the
setting.
BASS<G> :The factory default setting is “ 0 ”.
(Adjustment range: +7 to
–
7)
BASS<F> : The factory default setting is “ 50 ”.
(Adjustment range: 50/100/200)
BASS<Q> :The factory default setting is “ 1 ”.
(Adjustment range: 0.7/1/1.4/2)
MID<G> : The factory default setting is “ 0 ”.
(Adjustment range: +7 to – 7)
MID<F> : The factory default setting is “ 500 ”.
(Adjustment range: 500/1K/2K)
MID<Q> : The factory default setting is “ 1 ”.
(Adjustment range: 0.7/1/1.4/2)
TREBLE<G> :The factory default setting is “ 0 ”.
(Adjustment range: +7 to
–
7)
TREBLE<F>
:The factory default setting is
“ 10K ”.
(Adjustment range: 5K/10K/15K)
TREBLE<Q> :The factory default setting is “ 1 ”.
(Adjustment range: 0.7/1/1.4/2)
3-5. Press the [ ] button to return to the
previous mode.
S etting the MAGNA BA SS EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
∗
The factory default setting is “ OFF ” (off).
2-1. select “ M-B EX ”.
3-1. Press [ ] or [ ] button to select
“ ON
” or
“ OFF
”.
●
Adjustin g the balance
2-1. Select “ BALANCE ”.
3-1. Press the [ ] or [ ] button to adjust the
balance of the right and left speakers.
∗
The factory default setting is “ CENTER ”
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
●
Adjustin g the fader
2-1. Select “ FADER ”.
3-1. Press the [ ] or [ ] button to adjust the
balance of the rear and front speakers.
∗
The factory default setting is “
CENTER
”
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
●
Adjustin g the subwoofer
You can set the low pass filter of subwoofer.
2-1. Select “ LPF ”.
3-1. Press the [ ] or [ ] button to select as
following order.
“ THROUGH ”
↔
“ LPF 60 ”
↔
“ LPF 90 ”
↔
“ LPF 120 ”
∗
The factory default setting is “
THROUGH
”.
●
Adjustin g the subwoofer output
volume
You can adjust the volume output from the unit's
subwoofer output terminal.
2-1. Select “ S-W VOL ”.
3-1. Press the [ ] or [ ] button to increases
or decreases the subwoofer volume.
∗
The factory default setting is “ 0 ”.
(Adjustment range: +6 to –6)
CZ509E_EN.book Page 11 Wednesday, January 21, 2009 5:27 PM