11
English
Select tuner as playing source
Press [
SRC
] button once or more to enter
radio mode.
Select one radio band
Press the [
BAND
] key on the panel or [
BND
]
key on the remote control to select one radio
band among FM1, FM2, FM3, MW1 and
MW2.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
]/[
] key on the panel
or remote control to tune in a higher / lower
station.
Auto tuning
Press and hold the [
]/[
] key on the
panel or remote control to seek a higher /
lower station.
To stop searching, repeat the operation
above or press other keys having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
If the unit receives a stereo broadcasting,
the indicator light of stereo ‘ST’ on the LCD
display will be lighted.
Auto save
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the [
PS/AS
] (2 sec.) to start
automatic station search.
To stop auto save, press other keys having
radio functions.
Notes:
1. After auto save, the previous saved
stations will be overwritten.
2. The unit has 5 bands, such as FM1, FM2,
FM3, MW1, MW2 and each band can
store 6 stations; hence CZ500 can store
30 stations in total.
3. During automatic station search, the
detected 6 stations will be stored only to
FM3 band.
Radio Operations
Manual save
When one expected radio station has been
detected, press and hold number key 1~6 to
save it in the memory.
Recall the stored stations
Press one numeric key among 1 to 6 on the
panel or on the remote control to select the
corresponding stored station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [
ADJ
] key on the front panel, then
press [
] key repeatedly until LO or DX
displays on the screen, rotate the knob to
select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
HD Radio
After connect to HD radio box, [HD] lights up
on the screen.
Press [MENU] key and rotate the knob to
choose PTY or SUB-CH. Press the knob to
confirm selection.
