121
Hands-free system
Accepting, making and ending a call
An incoming call is shown on the display of the radio. The call tone is played back via the loudspeakers
of the vehicle. If the caller is saved in the phone book, the entry in the phone book is shown on the
display.
The telephone call can be accepted using the button
or function button
.
The telephone call can be rejected using the button
or function button
.
To make a phone call, connections can be established by using the control elements of the radio (see
below "Select saved caller numbers").
Using the function button
a current call can be transferred from the hands-free system to the mobile
phone.
To make the call again using the hands-free system, press the function button
.
The hands-free system is active again as soon as a call transferred to the mobile phone has ended.
A call can be ended using the button
or function button
.
Switch microphone to mute
The microphone is temporarily switched to mute by
briefly
pressing
the rotary knob. Press the button
again to cancel the mute function.
Setting the playback volume of the hands-free system
Calls carried out via the hands-free system of the radio are played back using the preset volume via the
vehicles loudspeakers. Using the rotary knob Fig. 1
you are able to change the volume during the
call. The subsequent calls are played back with this volume.
The quality of communication during a telephone conversation can be improved by reducing the
ventilation in the vehicle.
Select a call number from the phone book (CALL)
Entries in the phone book can be directly selected via the control elements of the radio.
Press the button
.
Press the function button
.
Use the rotary knob Fig. 1 to select the person
in the phone book and to call, press the rotary
knob Fig. 1
.
The standard number for the person is displayed. If several telephone numbers for this person are
saved in the phone book, these can be selected using the rotary knob Fig. 1
.
To establish the connection to the call number displayed, press the rotary knob Fig. 1
.
The connection can be cancelled using the button
or function button
.
Redial call (REDIAL)
After pressing the button
, using the function button
the connection to the last person
called, or the last call number dialled, can be established via the radio.
Caller list (LAST)
After pressing the button
, using the function button
the caller list saved in the radio can be
opened and can be scrolled through by turning the rotary knob Fig. 1
.
Using the function button
the connection to the person or call number displayed can be
established. After disconnecting the Bluetooth connection, the caller list saved in the radio is deleted.
The caller list is managed in the radio and must not correspond with the caller list in the mobile phone.
ACCE
REJE
HS
HF
HANG
1
1
CALL
9
9
9
9
HANG
REDIAL
LAST
9
CALL