119
Coupling Bluetooth device
Before coupling, the Bluetooth device must be switched on. The Bluetooth function must be activated
and there must be no other Bluetooth connection to another device.
An existing connection to a coupled Bluetooth device is disconnected on the radio automatically if a new
coupling process is started.
Keep the button
pressed until "BLUETOOTH" is shown on the display.
Press function button
.
"KEY" is shown on the display of the radio with a 4 digit number. This 4 digit number is the password
(PIN) required for coupling the Bluetooth.
The search for nearby Bluetooth devices starts on the Bluetooth device.
The Bluetooth device displays a list of the devices found.
Select "RMT300" from the list.
A password request appears on the mobile phone.
Enter the 4 digit value that is shown on the display of the radio. If an incorrect password has been
entered, the coupling process is cancelled and the device "RMT300" must be reselected from the list of
devices found.
Independently of the Bluetooth device used, a question may be displayed asking if this Bluetooth
connection should be established in the future without re-entering the password. Confirm this with "Yes",
to automatically establish the Bluetooth connection when the radio is switched on.
Independent of the Bluetooth device used, a question may be displayed asking if the phone book can
be transferred to the radio.
The indication "CONNECTED" is briefly shown on the display of the radio. The active Bluetooth
connection is displayed by the symbol
. If a mobile phone is connected, this is also shown by the
symbol .
Subsequently, in the background, the entries and telephone numbers saved in the phone book and
mobile phone are automatically transferred and saved ("PBA SAVE").
It is possible to save up to 500 entries in the phone book. If the phone book is considerably large, the
radio can respond with a delay whilst saving/sorting.
The data in the phone book is only visible when the corresponding mobile telephone is connected
and, thus, they are not visible to other users of the vehicle.
The Bluetooth connection is automatically disconnected if the device leaves the Bluetooth reception
range of the radio or the ignition is switched off.
If the Bluetooth connection is manually disconnected from the device, this is not automatically re-
established when switching on the radio. The connection can be re-established via the Bluetooth device
or the Bluetooth menu of the radio without having to re-enter the password.
Disconnecting the connection to the Bluetooth device on the radio
Keep the button
pressed until "BLUETOOTH" is shown on the display.
Press function button
to disconnect the existing connection to the Bluetooth device.
Reconnecting a coupled Bluetooth to the radio
The Bluetooth device must be switched on and Bluetooth activated.
Keep the button
pressed until "BLUETOOTH“ is shown on the display.
Press function button
.
The DEVICE LIST menu opens.
Press the function button
briefly
to display the name of the coupled Bluetooth device.
If the desired Bluetooth device is displayed, keep the respective function button pressed until
"SELECTED" is shown on the display.
The Bluetooth device selected is connected. Thereby, any existing connection to another Bluetooth
device is disconnected. This procedure may take several seconds.
The Bluetooth connection can also be re-established from the Bluetooth device. Here, in the menu
of the Bluetooth device, select "RMT300" and connect.
PAIRIN
DIS
CON
3