Clare Controls IP Network Camera, Руководство пользователя, Страница: 41 / 92

Clare Controls IP Network Camera User Guide 33
Configuring SNMP settings
You can set the SNMP function to get the camera status, parameters, alarm-related
information, and manage the camera remotely when it is connected to the network.
Before setting the SNMP, download the SNMP software and receive the camera
information via SNMP port. By setting the Trap Address, the camera can send the alarm
event and exception messages to the surveillance center.
Note: The SNMP version you select should match the SNMP software. Use the version
that corresponds with the security level you required. SNMP v1 provides no security,
SNMP v2 requires password for access, and SNMP v3 provides encryption. If you use
the third version, HTTPS protocol must be enabled.
To configure SNMP settings:
1. Enter the SNMP Settings interface.
Configuration > Camera Configuration > Network > SNMP