Clare Controls IP Network Camera, Руководство пользователя, Страница: 26 / 92

18 Clare Controls IP Network Camera User Guide
PBC mode:
PBC (Push-Button-Configuration) allows the user to push a button, on both the Access
Point and the new wireless client device for configuration.
To enable the PBC function:
1. Select the Enable WPS checkbox.
2. Choose the connection mode as PBC.
Note: The Access Points much each support PBC mode.
3. Check the Wi-Fi router for a WPS button. Push the button, and the indicator near the
button starts flashing. This means the WPS function is enabled. For detailed
operation, see the user guide of the router.
4. Push the WPS button on the camera.
If there is no WPS button on the camera, click the virtual button on the web interface
to enable the PBC function.
5. Click Connect .
When the PBC mode is enabled in both the router and the camera, the camera and the
wireless network connect automatically.
PIN mode:
The PIN (Personal Identification Number) mode requires the pin from either a sticker or
the display on the new wireless device. This PIN must then be entered to connect to the
network.
To enter PIN mode:
1. Choose a wireless connection on the list and the SSID is shown.