Clare Controls HDBaseT CM-BT20-TXRX100, Руководство пользователя

Страница: 6 / 20

ii HDBaseT Extender Set 100m User Guide
Safety precautions
Read all instructions carefully before using the device. Save this manual for
future reference. To guarantee equipment reliability and personal safety,
please follow the procedures listed below.

Unpack the equipment carefully. Save the original box and packing
material for future shipping.

Follow basic safety precautions to reduce the risk of fire, electrical
shock, and injury to persons.

Only qualified professionals should service this product. Do not open or
modify the device; it may result in electrical shock or burn. Do not
attempt any repairs. There are no user-serviceable parts inside. Any
attempt to open the equipment will result in a complete void of any
warranty and may result in serious injury or death.
 Only use parts that meet the device’s specifications. If you use parts
that do not match, it may cause damage to the device.
 Do not expose this device to rain, moisture, chemicals (including
aerosol cleaners), or any form of liquid to avoid fire or shock damage. If
exposure occurs, unplug the device immediately.

Do not disrupt the device’s cables or power source.
 Do not twist or use force to pull the optical cable, this can cause
damage or malfunction in the device.
 Do not leave this device plugged in and unused for long periods.

Do not burn or mix this device with general household waste. Treat the
device as electrical waste.

The system must be grounded properly. Do not use two blades plugs.
Ensure the supply voltage is in the correct range of 100 to 240 VAC,
50/60Hz.
 Do not place the device in a place that is abnormally hot/cold or does
not have proper temperature control and ventilation.
 The HDBaseT CM-BT20-TXRX100 generates heat when operating.
The environment should be well ventilated to prevent damage caused
by overheating.

Before cleaning or making/removing connections to the device, ensure
that the power supply has been disconnected.
Caution:
The HDBaseT CM-BT20-TXRX100 must be used as a pair. Do
not use the RX separately or in combination with HDBaseT switches, as
using it may cause damage to the unit.