Clare Controls HDBaseT CM-BT20-TXRX100, Руководство пользователя

Страница: 10 / 20

2 HDBaseT Extender Set 100m User Guide
Product appearance
Figure 1: The HDBaseT CM-BT20-TX100 transmitter
(1) LINK
The HDBT Link status indicator. It illuminates when the CM-BT20-TX100
and RX100 are linked and communicating and blinks when there is an
error in the link.
(2) HDCP The HDCP compliant indicator.

Illuminates when the output signal is HDCP

Blinks when the output signal is not HDCP

Extinguishes when there is no output
(3) Power LED Illuminates when the device is receiving power.
(4) RS232 RS232 connector.
(5) IR IN Connects to a 12v IR receiver, or the provided adapter cable. The IR
signal received from this port will be transmitted via HDBaseT to the
transmitter unit for use at the source location.
(6) IR OUT IR signals received by receiver and sent via HDBaseT to the transmitter
are available for emitter use from this port.
(7) HDMI IN Connect to the HDMI source device.
(8) HDBT OUT Connects via a single Cat5e/Cat6 cable to the HDBaseT port on the
receiver and supports bi-directional PoH.
(9) Ethernet 100M Ethernet interface, one of these 2 ports is used for internet access,
and the other is connected to a computer. When properly connected, the
LED indicators on the corresponding ports blink.
(10) Ethernet
(11) 24VDC Connects to the power supply.