DOC ID - 1990
• Rev 01 (
47-00014 Rev A)
5 / 7
D. With the cover closed, insert the cover securing screw
into the screw hole near the cover latch.
Sensor notes
•
Do
not
use with life safety sensors such as smoke, heat,
or CO detectors.
•
If the translator loses both 12VDC input power and battery
up power, sensor configuration data is retained.
•
Low battery, tamper, and supervisory signals are reported
by the translator on its ID.
•
Low battery signals from the translator are suppressed in
the first 24-hours after power-up. However, a missing
battery condition is reported right away.
•
The translator does not support multiple loops on
Honeywell® sensors. Only one loop may be used, reed or
external.
•
When
Sensor Select
is set to 2GIG®, both Honeywell®
and 2GIG® sensors will be translated or repeated.
•
Napco® Panic transmitters are not supported.
•
All Honeywell® sensors are automatically paired as a
door/window sensor if enrolled via FusionPro.
Fault conditions
12VDC input overvoltage fault
: Continually flashes and
beeps on the green LED and speaker.
12VDC input removed fault:
Green LED turns off and the
speaker makes a long beep.
Factory default
1. To return the translator to a factory default condition, press
and hold the configure button. After a couple seconds, the
sounder will start beeping rapidly. Continue holding the
button until the sounder stops beeping.
2. Factory default is not possible if the translator lock wire
has been cut.
Specifications
Compatible panels
ClareOne
RF frequency
433.95MHz
Sensor support
Up to 128
Dimensions
8.5 × 5 × 1.3 in.
(215.9 × 127 × 33.02 mm)
Weight with battery
16 ounces
Tamper activation
Cover opening, wall removal
Mounting screws
#4 or #6
Battery
Backup
Specifications
Trickle charge
Fast charge
24 hours minimum
6VDC 800mAh NiMH
8mA
32mA
Power supply input
100-240VAC 50/60Hz 0.5A
Power supply output
12VDC 1A
Operating environment
Temperature
Relative humidity
32 to 120°F (0 to 49°C)
85% noncondensing
Storage temperature
-4 to 86°F (-20 to 30°C), long term
Certifications
ETL Listings:
Other
UL1023, ULC1023, UL1610, ULC S304
FCC, IC
