2 / 7
DOC ID
– 1990 • Rev 01 (
47-00014 Rev A)
Figure 1: W2WL enclosure interior for mounting
Quick Setup
1. Mount and Wire
A. Select a mounting position and location.
B. Connect the power supply to the translator.
2. Translator Configuration
A. Turn the
PANEL SELECT
knob to ClareOne.
B. Select the brand of sensors that the translator must listen to using the
SENSOR SELECT
knob.
C. Sensor configuration: The translator must learn the sensors that are to be translated or repeated.
1. Press the
CONFIGURE
button to enter configuration mode. The amber LED will illuminate and stay on.
2. Tamper or trip all sensors that need to be repeated by the W2WL. The W2WL will beep each time a sensor
is enrolled.
Note
: Sensors with multiple inputs may need to be tripped separately to enroll each input.
3. Press the
CONFIGURE
button to exit configuration mode. The amber LED will darken.
3. Panel Enrollment
(For full sensor enrollment instructions, refer to Advanced Setup, step 3)
A.
Access the ClareOne panel’s Sensor Settings (Settings > Installer Settings > Sensor Management > Add
Sensors), then select “Wireless to Wireless as the device type. For detailed programming instructions,
please refer to the
