Page 8 of 25
User manual
Antenna model: AT3000
Rev 6.0 – September 2014
Clampco Sistemi is a registered trademark of
Calzavara SpA
– via Corecian, 60 – 33031 – Basiliano (Italy) http://www.clampco-sistemi.com/
1.3.2. Axis selection with USB switch box (item ATSA03)
This selector, connected to a PC via a USB port, allows you to perform the selection, via software, of the measure
axis in order to execute fast, automatic and repetitive measures. The total current is less than 20 mA and hence
does not affect in any significant battery life of any laptop.
Figure 4
: Automatic axis selection box ATSA03
Connect USB cable to USB PC port and then connect its pigtail to the connector of the composite cable (SA side).
The axis selected by the software is indicated by the corresponding LED panel.
Содержание AT3000
Страница 2: ......
