Clam 108398, Быстрый старт

Страница: 9 / 10

9
Drape the tent over the supported hoops, then go inside and attach the roof Velcro straps.
Remove the adjustable spreader poles and floor hoop poles. Feed the length of the pole through the hoop
sleeves sewn on the tent. Slide the floor hoop poles onto the porch poles.
Attach the floor hoop Velcro. Re-install the adjustable spreader poles. Inspect the tent for proper fit.
IMPORTANT!
When collapsing the Denali it is very important to collapse the two front floor hoop poles
first to relieve tension on the tent when folding. Failure to collapse the floor hoop poles first may cause
the tent to tear at the corners and in this case the tent will not be covered under warranty.
When collapsing, lay hoop poles on base alternating from one side to the other until all hoops are on top of
base.
Floor hoop Velcro
Hoop sleeves
Floor hoop Velcro
Hoop sleeves
Adjustable Spreader Pole
Adjustable Spreader Pole