ClairiTech Innovations Humidex HCS-APT Скачать руководство пользователя страница 9

 

Humidex 

 

Entering the Main Menu 

To change any settings for the HCS, you must first enter the main menu. To do so simply press the 

up arrow and cancel button at the same time. 
Once inside the main menu, the arrows keys can be used to cycle through the relative humidity menu, 
override menu and fan speed menu. The blinking icon will allow you to know which section you

’re

 

looking at (Red icons are blinking icons). 
 

 

               

               

 

 

 

 

To select one of these menus, press the Ok button. To return to the main screen press the cancel 

button. 

Relative Humidity Menu 

Once the relative humidity menu has been selected, the screen will change in order to allow the user 

to change the desired humidity level. Using the arrows keys will allow you to increase or decrease the 
desired RH value in increments of 5%. To accept a new value, select OK Button or the Cancel button 

to return to the main menu. If the wrong level is entered, repeat this procedure.  

 

 

 

** Recommended humidity level for summer season is 55% and 45% for the winter season.  Please 

note this does not show current humidity level, but rather the desired humidity level. 
 

 

 

 

 

Relative Humidity Menu 
 

Override Menu 
 

Fan Speed Menu 
 

Содержание Humidex HCS-APT











Отзывы: