Humidex
5
With the control mounted on the wall,
the wires must then be stripped and
connected following this guide:
Yellow Wire
–
B
Green Wire
–
A
Black Wire
–
GND
Red Wire
–
VCC
Once the wires have been connected,
the control can be closed and the screw
tightened.
This connection must then be repeated in
order to link the main exhaust unit. Wire
the green connector following the same
wire order as the control unit.
Now that the connecter has been wired,
insert it into the main exhaust unit.
Now that the control has been installed and connected to the main exhaust unit, the HCS can be
plugged into any 115V outlet.
Note:
A grounded extension cord with a maximum length of 10 feet may be used if necessary.
