Maintenance
※
How to clean the filter
Caution for maintenance
How to change the filter
12 months
Make sure to start cleaning
and filter management after
turning off power, unplugging
from power outlet and making
sure that the fan has stopped.
There is danger for electric
shock or other accidents if
filter is changed during
operation.
1. Turn the power off
and unplug from
power outlet.
2. Place the product on
a surface covered by a
soft towel. Place the
product with its back
facing towards you.
3. Hold the handle and
disassemble the back
cover.
4. Remove dust at the
top of the
filter
e2f
using a vacuum
cleaner.
2. Place the product
on a surface covered
by a soft towel. Place
the product with its
back facing towards
you.
2. Remove the thick
white frame by simply
pulling it off the back.
3. Hold the handles on both
side of the
e2f
filter and
disassemble the
e2f
filter
from main body.
4. Change to a clean unused
filter.
Filters last for a maximum of 12
months which is subject to
change depending on
installation place and
environmental conditions.
Cleaning the filters with water is
not recommended. Otherwise,
the cleaning performance may
be impaired since the filtering
function is reduced.
Do not touch power cord with
wet hands, for danger of electric
shock or other accidents.
Do not pull on the cable of the
power plug. It may cause
damage to the cable or injury.
Do not use water or detergent
when cleaning the body or filter.
It may cause stains or cracks on
the surface.
Do not place any objects on the
product. It may block the inlet or
outlet causing malfunction or
reduced ability of purification.
Keep children from climbing on
and putting fingerers or other
foreign matter in the outlet, as
this could cause injury.
Be careful that water is not
allowed the inside product. It
may cause a fire or electric
shock.
D
GB
F
NL
SE
FI
NO
SK
CZ
PL