clage Zip HydroTap SPARKLING Скачать руководство пользователя страница 28

Страница: 28 / 36

5. Using the Tap

Note: If the drinking water system has not been used for several days, allow the
tap to run cold water for about five minutes.

Operation

Press the red lever to dispense boiling water. Pull the lever up to dispense boiling
water continually. The water will flow for 5 to 15 seconds. This time can be set in the
menu. The lever then has to be manually returned to the Off position.
Press the blue lever to dispense cold water. Pull the lever up to dispense cold water
continually. The water will flow for 5 to 15 seconds. This time can be set in the menu.
The lever then has to be manually returned to the Off position.
Press the red and blue levers simultaneously to dispense sparkling water with carbon
dioxide added. Pull the levers up to dispense sparkling water continually. The water
will flow for 5 to 15 seconds. This time can be set in the menu. The levers then have to
be manually returned to the Off position.

Red boiling water LED

•  on all the time: boiling water is ready and can be dispensed.
•  flashing: the water temperature is below the set value.
•  flashing slowly: Sleep mode is enabled.

Blue cold water LED

• on all the time: temperature of cooled water is at the set temperature.

White filter LED

• flashing: the filter needs to be replaced. This LED starts flashing according to filter

use and the filter capacity set in the menu.

Child safety lock

A child safety lock can be enabled to prevent boiling water flowing out of the tap if the
boiling water control is accidentally operated. To draw boiling water when the child
safety lock is enabled, the Safety button has to be pressed and held down at the same
time as the red lever.
To enable the child safety lock, press the Safety button and the blue cold water lever at
the same time and hold for about ten seconds. The LED on the Safety button lights up
when the child safety lock is enabled.
To disable the child safety lock, press the Safety button and the blue cold water lever at
the same time and hold for about ten seconds. The LED on the Safety button goes out
when the child safety lock is disabled.

Menu

Basic settings can be carried out in the menu. Use the ‘Menu

∧’

and ‘Menu

∨’

buttons

to browse through the various options. Adjustable parameters can be adjusted with
the aid of the Adjust

∧

and Adjust

∨

buttons. Parameters that are not adjustable are

indicated by ‘[Info]’ in the list that follows.
• Litres filtered [Info]: quantity of water that has passed through the filter.
• Filter max. litres: the maximum quantity of water that can be filtered by the filter.

Adjustable between 1,000 and 10,000 litres in 1,000 increments. The value that
should be set can be found in the filter data.

• ‘Day’ off: deactivates the Zip HydroTap SPARKLING on the day of the week indicated

at the selected time to save energy.

Boiling water lever

Red light

Boiling

Chilled water lever

White light

Filter status

Blue light

Chilled

Child safety lock