background image

9

Instruc

tions f

or user - 9120-25532 - CEX9-U - 801041 - No

v

ember 2012 v1.00

To reset to factory settings press the up arrow and down arrow function keys simulta-
neously.

The display will count backwards from “10” to “00” in one second intervals.

The appliance is reset when the counter reaches “00”.

Releasing the function keys earlier will cancel the process. 

9. Reset to factory setting

Reset to factory setting

2

3

1

Press + 

Reset com-

+

10. Additional features

Energy saving

Set the required hot water temperature on the appliance.

If the water is too hot reduce the temperature on the appliance instead of mixing with 
cold water.

Adding cold water wastes valuable energy that has been used producing excessively 
hot water.

Also, any cold water added is not controlled by the electronic circuitry meaning that 
precise temperature control can no longer be guaranteed when supplying more than 
one outlet.

Power limit

If the maximum power available from the appliance is insuffi cient to heat the volume 
of hot water being drawn off to the required temperature this will be indicated by 
“MAX” on the display.

Reducing the fl ow rate will enable the required temperature to be delivered.

Operation with solar systems

The appliance is suitable for use with solar heating systems providing appropriate 
controls are in place to ensure that the temperature of the water entering the unit 
does not exceed 70ºC.

If the inlet temperature exceeds the set point, the “SUN” symbol on the display indi-
cates that the heating power is switched off.

Power limit

Energy saving mode

Heating is switched off

Содержание 27910













Отзывы: