9
US
Programming
SETTING THE cURRENT TImE
As soon as the battery is connected, the
display will show the clock page in a few
seconds.
The two dots in the center blink when in
operation.
Setting time of day
1.
Press
(the
OK
icon will appear).
2.
Use arrow keys to increase or decrease the time (holding down the
arrow key will move through the clock faster).
3.
When the correct time displays, press
(the
OK
icon will disappear).
Note:
Timer operates in military hours only (see page 16).
SETTING WATERING pROGRAmS
The Timer has dual outlets for two independent zones and up to six daily
watering programs. Each line has three programs per day.
Programs 1,3,5 run on line A (left outlet); programs 2,4,6 run on line B
(right outlet).
The timer works on a 24 hour clock
(i.e. 2 pm = 14:00) therefore prior to
setting the programs, make sure your scheduling falls within a 24 hour
window.
Program 1 must corresponds to your earliest watering cycle of the day
because all following programs move forward in time from program 1.
(i.e. if program 1 is set up to start at 16:00 = 4 pm, there are 8 hours left in
which the remaining programs can be set).
