UK
General specifications
C. OK button
This allows the user to change the settings on the current page, by
means of the
buttons. Press it to confirm the setting and
quit the change mode. This allows the user to change the settings
on the current page, by means of the buttons. Press it to confirm
the setting and quit the change mode.
D. RF button
Used during operations that involve communication with the
selected RF Unit:
- to transfer the watering programme from the remote control to
the selected RF Unit.
- to activate the manual/TEST operating mode.
The RF button is active ONLY on the
RF Unit selection pages
,
and on the
manual/TEST
access page.
E. S1 button
This button can be operated only with a pointed object (such as a paper
clip). Used for procedures by which the remote control is connected
with an RF Unit.
The S1 button is active ONLY on
RF Unit selection pages
and
serves also to restore the factory settings (RESET).
F. LEDs 1 ... 6
A LED is associated with each of the RF Units operated by the remote
control, which blinks when the relative RF Unit is selected: LED 1 for RF
Unit 1, LED 2 for RF Unit 2 and so on. When the initial current TIME/DAY
page is displayed, all LEDs will remain off.
48
Telecontroller_6U_PROFESSIONAL_EN.indd 48
14/01/16 12:22
