Claas TUCANO 2017, Информация и базовые настройки поля

Страница: 29 / 40

Cleaning
28
Preparation pan
The preparation pan is the first part of the cleaning system that the grain will come
into contact with. It’s function is to separate the grain and the chaff. The grain is
heavier and therefore goes to the bottom, the lighter chaff goes to the top. It is
important that this is kept clean, to allow this to happen effectively. A dirty
preparation pan will cause a poor sample and reduce output.
Fan
Speed adjustment is carried out via the rotary dial. The
speed is shown on the CEBIS screen. The speed range
of the fan is 700rpm – 1400rpm. (Tucano 320, 480-920
rpm) Adjustments are recommended at no more than
50rpm at a time.
There are two other adjustments that can be made.
Firstly position of the wind boards can be adjusted by
undoing the bolt (2) and moving the position of the
levers (3,4). Lower for heavier crops and higher for
lighter crops, on both sides of the machine.
Secondly the wind throttle valve on the RHS of
the machine can be adjusted. For lighter crops
it may be beneficial to move the lever to the
front of the machine and for heavier crop
towards the rear.