Claas TUCANO 2017, Информация и базовые настройки поля

Страница: 26 / 40

Pre-Separation
25
De-awning
On the TUCANO 400 Series de-awning can be carried by out operating the lever (1),
by the right hand front wheel of the machine into position A, which in turn installs a
set of plates under the APS concave. This gives the crop an extra ‘rub’ which in turn
threshes it harder. They must only be installed when threshing is stopped.
It is recommended that these plates are only engaged when there is a difficulty in
threshing. These plates can reduce output by up to 30%.
If plates have been used make sure that the concave is clean.
Further information regarding the use of the de-awners is in the relevant section of
the operators manual.
Stone trap
The stone trap is situated between the front elevator and the APS concave. It is
important that stone trap is emptied on a daily basis to allow for foreign objects to be
expelled before they enter the drum.
Stone Trap