CKD EVD Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 27

CKD EVD Series Скачать руководство пользователя страница 8

Intro 6

During use & Maintenance

Do not supply other than compressed air.

Use clean compressed air that does not contain cor-
rosive gas.

Use "ISO Class 1.3.2" clean dry air from which oil
has been removed.

Before servicing the product, turn power OFF, stop
the compressed air supply, and check that there is
no residual pressure.

This is a requirement for ensuring safety.

WARNING

If an abnormality occurs during operation, turn power
and air pressure off immediately and stop use.

Use this regulator within the working pressure range.

This regulator does not start pressure control for
about 2 seconds after power is turned on so it can
complete self-diagnostics. Provide a control circuit
and program that ignores signals for about 2 sec-
onds after power is turned on.

When the output setting is changed, controllers could
operate accidentally. Stop devices before changing
settings.

Regularly inspect the regulator at least once a year
and confirm that it is operating correctly.

This case is made of resin. Do not use solvent, alco-
hol, or detergent when cleaning because resin could
be damaged. Wipe off dirt with a rag dampened in a
diluted neutral detergent solution.

Plan daily inspections and periodic inspections to
ensure that maintenance is correctly controlled.

If maintenance is not correctly controlled, the product's func-
tions could drop markedly and lead to a shortened life, dam-
age, malfunctions, faults, and accidents.

1. Control of supplied compressed air pressure

Is the set pressure supplied? Does the pressure gauge indi-
cate the set pressure during operation of the device?

2. Control of air filter

Is the drain correctly discharged?
Is the bowl or element dirty?

3. Control of compressed air leaks from piping connec-

tions

Is the state of the connection, especially at movable sec-
tions, normal?
Operation may be abnormal if pipes leak.

4. Control of operation

Are any operations delayed? Is exhaust normal?

5. Control of pneumatic actuator operation

Is operation smooth? Is end stop normal?
Is coupling with the load normal?

CAUTION

Individual Precautions

EVD

Series

Minimum

Maximum

«
...
6
7
8
9
10
...
»

Содержание EVD Series




























Отзывы:

Нет отзывов