CKD EVD Series, Руководство пользователя, Страница: 4 / 27

Intro 2
Safety Precautions
Always read before starting use
1
2
3
4
5
The safety cautions are ranked as "DANGER", "WARNING" and "CAUTION" in this section.
DANGER:
WARNING:
CAUTION:
WARNING
When designing and manufacturing a device using CKD products, the manufacturer is
obligated to check that device safety mechanical mechanism, pneumatic control circuit, or
water control circuit and the system operated by electrical control that controls the devices is
secured.
It is important to select, use, handle, and maintain the product appropriately to ensure that the
CKD product is used safely.
Observe warnings and precautions to ensure device safety.
Check that device safety is ensured, and manufacture a safe device.
This product is designed and manufactured as a general industrial machine part.
It must be handled by an operator having sufficient knowledge and experience in handling.
Use this product in accordance of specifications.
Observe corporate standards and regulations, etc., related to the safety of
device design and control, etc.
Observe warnings and cautions on the pages below to prevent accidents.
Do not handle, pipe, or remove devices before confirming safety.
1
2
1
2
3
4
Contact CKD when using the product outside the unique specifications range, when using it outdoors, and when
using it under the conditions and environment below. Do not attempt to modify or additionally machine the product.
Use for special applications requiring safety including nuclear energy, railroad, aviation, ship, vehicle,
medical equipment, equipment, or applications coming into contact with beverage or food, amusement
equipment, emergency shutoff circuits, press machine, brake circuits, or for safeguard.
Use for applications where life or assets could be adversely affected, and special safety measures are
required.
Inspect and service the machine and devices after confirming safety of the entire system related to this
product.
Note that there may be hot or charged sections even after operation is stopped.
When inspecting or servicing the device, turn off the energy source (air supply or water supply), and turn off
power to the facility. Discharge any compressed air from the system, and pay enough attention to possible
water leakage and leakage of electricity.
When starting or restarting a machine or device that incorporates pneumatic components, make sure that
the system safety, such as pop-out prevention measures, is secured.
ISO 4414, JIS B 8370 (pneumatic system rules), JIS B 8368 (pneumatic cylinder), JPAS 005 (principles for
pneumatic cylinder use and selection), High Pressure Gas Maintenance Laws Occupational Safety and
Sanitation Laws, and other safety regulations, corporate standards, and regulations.
When a dangerous situation may occur if handling is mistaken leading to fatal
or serious injuries, or when there is a high degree of emergency to a warning.
(DANGER)
(WARNING)
(CAUTION)
When a dangerous situation may occur if handling is mistaken leading to fatal
or serious injuries.
When a dangerous situation may occur if handling is mistaken leading to
minor injuries or physical damage.
Note that some items described as "CAUTION" may lead to serious results depending on the
situation.
In any case, important information that must be observed is explained.