[SM‑276677‑A]
−
8
−
Ｆｉ
ｇ５．Voltage Input(3-Line System)Connection Diagram
2)
Current Input Type (2-Line System) Connection
Use the 6mm external diameter, 2-core shield cable 0.5-1 5mm
2
for a device controlled with input
signal of 4mA -20mA current. To avoid connected to a malfunction caused by noise, the shield cable
must be connected to Ground at the operation side as same as at the Voltage Input Type.
As Figure4 indicates, connect to the respective terminals as indicated in Fig7.
Fig６．2-line Input Cable
WIRING
２
Discontinue
