■
INTRODUCTION
■
FEATURES
■
Unpacking
■
Safety intructions
► Additional features
▪ Dimmer 0-100%
▪ Strobe 1-30 fps
▪ Power In/Out for daisy-chain
▪ Optical lens: 25° (installed)
▪ Quarter-turn fastener mounting points
PRODUCT VIEW
Thank you for selecting the MovePixelBar108 . With motorized tilt
moment and 36pcs high power3W
LEDs,this
gives you ultra bright, smooth and unlimited colors to project on a
wide area for enhancing your enviroment. Please read this user
manual carefully and thoroughly before operation.
mixing
MovePixelBar108
● 1
x
● 1
x
Power
cord
with
plug
● 1
x
User
Manual
MovePixelBar108
!
Warning!!! To reduce the risk of fire, electric shock, or injury
to persons, follow these important safety instructions:
▪ This product is intended for indoor use only!
▪ Always turn off, unplug power and allow fixture to cool before servicing.
▪ Ensure that fixture is properly grounded.
▪ Please keep this User Guide for future consultation.
▪ Always make sure that you are connecting to the proper voltage and that the
line voltage you are connecting to is not higher than that stated on decal or rear
panel of the fixture.
▪ To prevent risk of fire or shock, do not expose fixture to rain or moisture.
▪ The unit must be installed in a location with adequate ventilation, at least 50cm
from adjacent surfaces. Be sure no ventilation slots are blocked.
▪ Always disconnect from power before servicing or replacing fuse.
▪ Make sure power cord is never crimped or damaged.
▪ Do not look into the beam from a distance of less than 40 cm (16 inches).
▪ Do not stare into the beam for extended periods at a short distance.
►
Key features
▪ RGB color mixing
▪ 4 modes: Auto, Sound active, DMX, Program
▪ 2 DMX modes:6ch, 39ch
▪ 5 built-in programs
▪ Onboard programming functionality enables programming
without external DMX controller
▪ Thermal management system ensures long life of LEDs
▪ Electronic protection against short circuit
▪ 3-pin or 5-pin XLR connectors
▪ Blue LCD display of 16 x 2 digits
▪ Power failure memory
▪ Set Slave ID
▪
LED Refresh-rate 400Hz suitable for use in TV studio
Power in
Power
out
DMX out DMX in
Power switch
4
3
