background image


 

System Compliance Information 

 

 

The 5702 SHoW DMX SHoW Baby Transceiver is CE Certified 

 
 

Standards Applied: 

 
BS EN 60950-1:2002 incorporating Corrigendum No. 1 and Amendment No. 1

 

EN 55203-1: 1996 
EN 55203-2: 1996 
EN 301 489-1 V1.4.1 
EN 301 489-3 V1.4.1 
 
Products Conform to CE Marking Directive 93/68/EEC 
All SHoW DMX models are RoHS compliant 

 
Safety Notices 

Please read this entire manual before using your new equipment.  Please keep the manual in a 
safe place so you can refer to it in the future as required. 
 
The SHoW DMX System is intended for use only by qualified professionals.  Connection, 
installation, and hanging of this equipment must be performed in accordance with all pertinent 
local, regional, and national safety codes and regulations.   
 
SHoW DMX equipment is intended for indoor use only unless specified for outdoor use. 
 
Keep the equipment dry!  Do not operate the equipment if it gets wet! 
 
Do not operate in excessive heat/direct sunlight. 
 
Be sure installation provides adequate ventilation. 
 
There are no user-serviceable parts inside!  Refer to qualified service personnel! 

 
RF Exposure:

  The antenna(s) used for this transmitter must be installed to provide a 

separation distance of at least 20cm from all persons and must not be collocated or operating in 
conjunction with any other antenna or transmitter. 
 
 
 

 

Содержание SHoW DMX SHoW Baby












Отзывы: