11
Connecting Three Color (RGB) or Four Color (RGBW, RGBA) LED Tape
12
Volt three color LED tape is provided with a
12VDC
circuit and a –VDC circuit for
each color.
1.
Connect the +
12VDC
circuit to any one of the eight + output terminals. The + terminals
are bussed
and provide constant voltage. Note that some tape comes pre-wired with
Black wire for the +
12VDC
circuit while other tape comes pre-wire with White wire.
2.
Connect the R, G
,
and B circuits each to one the eight – output terminals (in the case of
four color tape, connect the A or W circuit to the fourth – output terminal).
–
The
terminals are the PWM dimmed outputs of the Dimmer.
*
Note that some tape
comes with the R, G, and B (and A or W) circuits in a different order than others.
3.
– Output terminals located on the same channel will be controlled by the same DMX
address.
4.
Select the LED Curve for each dimmer channel used.
5.
If you wish to change the PWM frequency, use RDM or the MOD DIP switch to select
the frequency desired.
QolorFLEX
4x10A
Dimmer Specifications
DMX Control Features
The
QolorFLEX
4x10A
Dimmer Includes:
•
Rotary switches for DMX addressing
.
•
0-10V input control
.
•
DMX 5-pin XLR terminals for input/Pass-Thru
.
•
Ethernet Terminals for DMX In/Pass-Thru
.
o
*Note: a total of one input and one output may be used per 4x10A.
•
Termination switch for end-of line DMX termination
.
•
RDM Responder functions
.
Mechanical
•
Rugged NEMA
one
Aluminum enclosure surface mounting tabs for wall or deck
mounting
Electronic/ Functional
Features
All units include:
•
Bump
b
uttons
•
Rotary switch, DMX Addressing
•
DIP Switch, Curve Selection (four choices)
•
DIP Switch, LED TV and Film Modes (five
choices)
•
DIP Switch, 0-10V Input Control Enable (on-off)
•
DIP Switch, DMX Termination (on-off)
•
LED indicators:
o
Dimmer pilot lights (one for each
channel)
o
DMX (data present)
o
Status
•
Fan
c
ooled
Othe
r Features
All units include:
•
Four dimmer output channels with two outputs per channel
.
o
Max output per dimmer channel 10A ( shared between two
outputs)
.
o
screw terminals
