Page 9 of 29
mountable in a standard 19” x 3U rack mount space (
remove the four rubber feet
by removing
the mounting screws before rack mounting).
When installed horizontally on the top edge of the unit, the mounting ears double as mounting
points f
or ½” hardware and can be used with C-Clamps or other suitable hardware to hang the
unit on pipe or truss. There is a safety cable loop built into the right side of the unit for use with
a user-provided safety cable when hanging the unit.
OPERATING THE PDS-750 TRX
Figure 4, PDS-750 TRX User Interface
User Interface
The PDS-750 TRX is provided with a button pad for user control and an LCD screen that
displays menu settings, configuration options, performance data, and any other text or graphics
that relate to unit function.
Press the Enter (center) button to access the menus, and press the Up or Down buttons to
move through the menus. When you reach a menu that you want to work in, simply press Enter
to begin editing. Press Enter again to save your changes. To cancel an edit, press and hold
the Left button.
Configuring the PDS-750 TRX
Before you can use the PDS-750 TRX, you will need to configure it by selecting the input
options and output options you wish to use. You can perform a basic configuration quickly
using the Setup Wizard, or fine tune any input or output configuration settings by going directly
to the menu for that option.
