CITY BOSS T7, Руководство пользователя

Страница: 5 / 16

E-scooter CITY BOSS T7 / V5 / V4
ENGLISH 53
Quick-release clamp
The quick-release clamp on the handlebar rod should be adjusted to put a resistance at the
closing and to prevent the handlebar rod to slide downwards when pressed from the top. If the
clamp is too loose, open it, tighten the nut on the screw axis and close the clamp.
Brakes
The brakes are factory adjusted. If you do not like the settings of the mechanical (disc) brakes,
you can adjust them - we recommend adjusting them only
after a few rides:
a/ the braking intensity is adjusted by the screw on the brake
lever (1) or the brake mechanism (2). If you loosen the safety
nut and unscrew the bolt, the braking rate will be higher and
oppositely. Then tighten the safety nut again. Or you can
loosen the cable fixing bolt (3), shift the cable and tighten
the bolt.
b/ the centering of the brake pads can be adjusted by the
screws (4) on the brake mechanism - gently loosen the bolts,
center the brake so that the brake disc is centered between
the braking pads and tighten the bolts.
Looseness of handlebar mechanism
The handlebars can have a small space in the folding
mechanism. If the mechanism wobbles too much, it can be
adjusted with the screw (5) located in the joint of the folding
mechanism (when the handlebar is folded, the bolt is visible).
By turning the bolt gently outwards it will decrease the space and
oppositely. If the bolt is unscrewed too outwards, the handlebars can
not be folded down - in this case screw the bolt gently inwards.
Tire pressure
The optimal tire pressure is 40-50 p.s.i. / 2.8-3.4 bar.
Battery capacity
Charge the battery to 100% capacity - the LED on the charger lights
green.
E-scooter CITY BOSS T7 / V5 / V4
ENGLISH 53
Quick-release clamp
The quick-release clamp on the handlebar rod should be adjusted to put a resistance at the
closing and to prevent the handlebar rod to slide downwards when pressed from the top. If the
clamp is too loose, open it, tighten the nut on the screw axis and close the clamp.
Brakes
The brakes are factory adjusted. If you do not like the settings of the mechanical (disc) brakes,
you can adjust them - we recommend adjusting them only
after a few rides:
a/ the braking intensity is adjusted by the screw on the brake
lever (1) or the brake mechanism (2). If you loosen the safety
nut and unscrew the bolt, the braking rate will be higher and
oppositely. Then tighten the safety nut again. Or you can
loosen the cable fixing bolt (3), shift the cable and tighten
the bolt.
b/ the centering of the brake pads can be adjusted by the
screws (4) on the brake mechanism - gently loosen the bolts,
center the brake so that the brake disc is centered between
the braking pads and tighten the bolts.
Looseness of handlebar mechanism
The handlebars can have a small space in the folding
mechanism. If the mechanism wobbles too much, it can be
adjusted with the screw (5) located in the joint of the folding
mechanism (when the handlebar is folded, the bolt is visible).
By turning the bolt gently outwards it will decrease the space and
oppositely. If the bolt is unscrewed too outwards, the handlebars can
not be folded down - in this case screw the bolt gently inwards.
Tire pressure
The optimal tire pressure is 40-50 p.s.i. / 2.8-3.4 bar.
Battery capacity
Charge the battery to 100% capacity - the LED on the charger lights
green.