CITY BOSS T7, Руководство пользователя

Страница: 11 / 16

E-scooter CITY BOSS T7 / V5 / V4
ENGLISH 59
BATTERY & CHARGER
Each electric e-scooter CITY BOSS is equipped with a specific battery and a specific charger.
Each scooter and parts also have their unique serial numbers.
Never charge the battery with a different charger which does not belong to the e-scooter!
Otherwise there is a serious risk of battery damage. Our company is not responsible for
destroying the battery or charger if used non-original charger.
Lithium battery
Before the first trip, charge the battery to 100% capacity.
To be sure that you reach your destination, we recommend to charge the battery to full
capacity at the latest when the display shows only two degrees while driving.
If you do not use the e-scooter for a long time (for more than 2 months), charge the battery to
approx. 60% of the full capacity.
The battery is protected from undercharging. However, when the display shows battery
capacity low and the display suddenly turns off while driving, do not turn the display on and do
not keep riding with low battery capacity. If the display turns off, it is the signal of undercharge
protection. Charge the battery right after the trip - never store the e-scooter with low battery
capacity!
If the battery does not charge after connecting to the charger, contact your dealer.
The battery can be damaged by abnormal exposure to water, shocks, etc. In such case the
warranty will be void.
Contact your dealer if you notice:
 a strange smell coming from the battery

that the battery is very hot while riding

that something appears to be leaking from the battery
Charger
The sophisticated charger supplied with the e-scooter CITY BOSS automatically disconnects the
charger when the battery is charged to 100% capacity - it is equipped with overcharge
protection. However, because of the safety and the optimum battery life, it is recommended to
disconnect the scooter from the charger once the battery is fully charged.
Charging procedure
1. Open the protective cap of the charger socket located on the right side of the deck and
connect the charger plug.
2. Plug the charger into the wall socket (220 V).
3. The charging process is running until the charger LED light is red. The charging process is
completed when the charger LED light turns green - the battery is charged to 100% capacity.
4. Disconnect the charger from the wall socket and the plug from the e-scooter.
5. Close carefully the charger connector with the protective cap.
E-scooter CITY BOSS T7 / V5 / V4
ENGLISH 59
BATTERY & CHARGER
Each electric e-scooter CITY BOSS is equipped with a specific battery and a specific charger.
Each scooter and parts also have their unique serial numbers.
Never charge the battery with a different charger which does not belong to the e-scooter!
Otherwise there is a serious risk of battery damage. Our company is not responsible for
destroying the battery or charger if used non-original charger.
Lithium battery
Before the first trip, charge the battery to 100% capacity.
To be sure that you reach your destination, we recommend to charge the battery to full
capacity at the latest when the display shows only two degrees while driving.
If you do not use the e-scooter for a long time (for more than 2 months), charge the battery to
approx. 60% of the full capacity.
The battery is protected from undercharging. However, when the display shows battery
capacity low and the display suddenly turns off while driving, do not turn the display on and do
not keep riding with low battery capacity. If the display turns off, it is the signal of undercharge
protection. Charge the battery right after the trip - never store the e-scooter with low battery
capacity!
If the battery does not charge after connecting to the charger, contact your dealer.
The battery can be damaged by abnormal exposure to water, shocks, etc. In such case the
warranty will be void.
Contact your dealer if you notice:

a strange smell coming from the battery
 that the battery is very hot while riding
 that something appears to be leaking from the battery
Charger
The sophisticated charger supplied with the e-scooter CITY BOSS automatically disconnects the
charger when the battery is charged to 100% capacity - it is equipped with overcharge
protection. However, because of the safety and the optimum battery life, it is recommended to
disconnect the scooter from the charger once the battery is fully charged.
Charging procedure
1. Open the protective cap of the charger socket located on the right side of the deck and
connect the charger plug.
2. Plug the charger into the wall socket (220 V).
3. The charging process is running until the charger LED light is red. The charging process is
completed when the charger LED light turns green - the battery is charged to 100% capacity.
4. Disconnect the charger from the wall socket and the plug from the e-scooter.
5. Close carefully the charger connector with the protective cap.