CITY BOSS GX2, Руководство пользователя

Страница: 25 / 28

E-scooter CITY BOSS GX2
ENGLISH 25
The battery can be damaged by abnormal exposure to water, shocks, etc. In such case the
warranty will be void.
Contact your dealer if you notice:
•
a strange smell coming from the battery
•
that the battery is very hot while riding
•
that something appears to be leaking from the battery
Charger
The sophisticated charger supplied with the e-scooter CITY BOSS automatically disconnects the
charger when the battery is fully charged - it is equipped with overcharge protection. However,
because of the safety, it is recommended to disconnect the scooter from the charger once the
battery is fully charged.
Charging procedure
1. Unplug the cover of the charger socket - located above folding mechanism and connect the
charger plug.
2. Plug the charger into the wall socket (220 V).
3. The charging process is running until the charger LED light is red. The charging process is
completed when the charger LED light turns green - the battery is charged to 100% capacity.
4. Disconnect the charger from the wall socket and the plug from the e-scooter.
5. Close carefully the charger connector with the protective cap.
Always charge the battery in a dry and ventilated environment. Never cover the charger during
charging process, otherwise it may get damaged. The charger is only for indoor use.
The charger can be damaged by abnormal exposure to water, shocks, etc. In such case the
warranty will be void.
RIDING INSTRUCTIONS
Before the trip
1. Choose an open space.
2. Unfold the e-scooter according to the previous instructions.
The trip
1. Press the button ON/OFF for 2-3 seconds until the display turns ON. And vice versa. If the
display does not turn ON, check the battery if it is charged to 100% (the charger LED is green) or
if you made connection
– see Scooter assembly section.
2. The e-scooter features three speed modes that adjust the speed level. When the display is
turned on, the last used speed mode is set. To change the speed mode, press shortly the button
ON/OFF: D1
– slow (about 15 km/h); D2 – medium (about 20 km/h); D3 – fast (about 23-25
km/h).
3. The e-scooter is preset to the safe-start mode. Place one foot on the deck, push forward with
the other foot. Then press the throttle gently. Tilt your body forwards during acceleration. To
gain better stability keep the front foot forwards and the rear foot turned with angle 70-
90° to
the front one. Assist with the scooter motor during the ride.