CITY BOSS GX2, Руководство пользователя

Страница: 22 / 28

E-scooter CITY BOSS GX2
ENGLISH 22
SAFETY INSTRUCTION
1. This device is designed for single use. Do not allow children under 12 to use the scooter. Do
not carry any passenger.
2. Always wear safety equipment such as a helmet and shoes.
3. Practice in open space and get familiar with the control method before riding.
4. Do not do stunts. Keep the feet on the device.
5. Do not ride the device on oil or ice.
6. Do not use the device under -
5°C.
7. Do not sink the device into the water depth of 3 cm or deeper. It would cause a short-circuit,
fault of the motor or electronic parts.
8. If you do not use the device for longer time, charge the battery to 100% capacity.
9. Before using e-scooter, make sure that you do not violate local laws and regulations by
operating it. If you are not sure, contact your local authorities.
10. Check all parts are secured and the bolts are tightened before every ride.
11. Do not make unauthorized modifications to reduce the safety of your device.
12. Regularly check the wear and tear of the product. Replace worn parts immediately.
13. Keep the instructions in the User manual for maintenance and use. Do not disassemble the
device yourself.
14. Check the battery status before each trip. If it is low charged, do not start the trip.
15. The device is for personal use only. Commercial use is not allowed.
16. When riding on uneven surface, keep your legs relaxed and your knees slightly bent.
17. Other activities (making calls, listening to music) can significantly reduce your driving
attention.
18. Do not exceed max. weight.
SCOOTER ASSEMBLY
Assemble the scooter before the first trip:
1.-2. Connect the cable inside of tube and head part (watch arrows on connectors).
Press for a few seconds switch ON / OFF on the display until the display turns ON. If the display
does not turn ON, check the battery if it is charged to 100% (the charger LED is green).
3. Allign both parts and tighten the screw firmly.