Citronic 170.885UK, Руководство пользователя

Страница: 8 / 10

170.885UK User Manual
29. PROGRAM Rotate to select a preset and push to select.
Push again to select parameter 1.
A single red dot will flash in the display.
Rotate to set value and push to accept value.
30.
Display LED numeric display to show effect status
Includes an LED VU meter to show effects
bus level.
31.
TAP/TEMPO Tap button 3 or more times in time with
music to set repeats of delay effects or press
this button to access parameter 2 on other
effect patches (see DSP Effects Table
section). The tempo will be indicated by the
adjacent flashing LED.
32.
AUX MASTER Master volume control for mix of all AUX
signals.
33.
AFL
After Fade Listen: routes AUX output to the
headphones and monitor outputs and VU meters.
34.
FX MASTER Master volume control for output of DSP FX
35.
AFL
After Fade Listen: routes DSP FX output to the
headphones and monitor outputs and VU meters
36. TO AUX Press in to send DSP FX output to the AUX bus
37. EFFECTS Fader Controls the output of the DSP FX to the main mix
Main Output
38. +48V Phantom power switch. Press in to 48V to all XLR
channel inputs to power condenser microphones or DI boxes.
39. VU Meters LED level meters for main output or PFL/AFL monitoring
40. MAIN Faders Left + Right faders for main output level
Rear Panel
41. IEC mains inlet and fuse holder
Connect the supplied power lead here.
42. Power on/off switch
Turn down main level controls before
powering up or powering down.