CITROËN C4 PICASSO, Руководство пользователя

Страница: 191 / 352

XI
189
P R A C T I C A L I N F O R M A T I O N
Temporary use spare wheel
If your vehicle is equipped with a
spare wheel for temporary use only,
when fi tting this it is normal to ob-
serve that the wheel bolts do not
come to bear directly on the wheel
rim.
The spare wheel is secured by the
conical tapering of the wheel bolt’s
shaft.
When re
fi tting the original wheel, en-
sure that the wheel bolts and wash-
ers are clean and in good condition.
Fitting a wheel
) Position the wheel with the aid of
the centring guide 3 .
) Do up the 3 bolts by hand, then
remove the centring guide 3 .
Position the 4 th bolt.
) Pre-tighten the wheel bolts, us-
ing the wheelbrace 4 .
) Retract the jack 5 and disengage it.
) Tighten the wheel bolts, using
the wheelbrace 4 .
)
Ensure that the tyre pressure is
correct.
Under-in fl ation detection
Wheels with under-in fl ation detection
have tyre pressure sensors. Have repairs
to them carried out by a CITROËN dealer
or a quali fi ed workshop. The spare wheel
does not have a sensor.
Security bolts (alloy wheels)
Each wheel may be equipped with
one security bolt (depending on the
country of sale).
To remove it:
) remove its protective cover us-
ing of the tool for removing the
chrome covers 2 .
) use the security bolt socket 6
with the wheelbrace 4 .
Spare wheel dimensions
If your spare wheel has dimensions
different from those of the standard
vehicle wheels (identi fi ed by a la-
bel), it is imperative to use the spare
wheel only temporarily, to drive
with caution, not to exceed 50 mph
(80 km/h) and to have the tyre re-
paired and the standard wheel re fi t-
ted as soon as possible.
Tyre pressures
These are indicated on the label
on the front left-hand door pillar
(see "Technical Data - Identi fi cation
markings").
The wheel bolts are speci fi c
to each type of wheel.
If new wheels are fi tted, check with
your CITROËN dealer or a quali fi ed
workshop that the wheel bolts are
compatible with the new wheels.
Make a note of the code number on
the head of the security bolt sock-
et. This will enable you to obtain a
replacement security bolt socket
from your dealer.