CITROËN 2014 C4 Picasso, Руководство пользователя, Страница: 155 / 428

153
4
Driving
C4-Picasso-II_en_Chap04_conduite_ed01-2014
The system is reactivated automatically
every time the engine is started by the
driver.
Reactivation
Press this button again.
Operating fault
Have it checked by a CITROËN dealer or a
qualified workshop.
In the event of a fault in STOP mode, the
vehicle may stall.
All of the instrument panel warning lamps come on.
Depending on version, an alert message may
also be displayed, asking you to place the gear
selector lever on position N
and put your foot
on the brake pedal.
It is then necessary to switch off the ignition
and start the engine again using the "START/
STOP" button.
In the event of a fault with the system,
the symbol for the button changes
to alert mode and the warning lamp
flashes for a few moments then
comes on continuously.
The system is active again; this is
confirmed by the indicator lamp in the
button going off and illumination of
this symbol.
The Stop & Start system makes use of
advanced technology. For any work on
the system go to a qualified workshop
with the skills and equipment required,
which a CITROËN dealer is able to
provide. Before doing anything under the
bonnet, deactivate the Stop & Start
system to avoid any risk of injury
resulting from automatic operation of
START mode.
Maintenance
This system requires a 12 V battery with a
special specification and technology (reference
numbers available from CITROËN dealers).
Fitting a battery not listed by CITROËN
introduces the risk of malfunction of the
system.
For charging, use a 12 V charger and do not
reverse the polarity.