CITROËN 2014 C4 Picasso, Руководство пользователя, Страница: 146 / 428

144
Driving
C4-Picasso-II_en_Chap04_conduite_ed01-2014
To engage reverse gear
R
, the vehicle must be
immobilised with your foot on the brake pedal.
F
select position R
.
Reverse
Engagement of reverse gear is accompanied
by an audible signal.
At low speed, if reverse gear is requested,
the N
indicator flashes and the gearbox goes
into neutral automatically. To engage reverse,
put the selector lever in position N , then
position R
.
Before switching off the engine, you can:
- move to position
N
to engage neutral,
or
- leave the gear engaged; in this case, it will
not be possible to move the vehicle.
Stopping the vehicle
In both cases, if automatic operation of the
electric parking brake has been deactivated,
you must
apply the parking brake
by pulling
the control lever.
When immobilising the vehicle, with
the engine running, you must place the
selector lever in neutral N
.
Before carrying out any work in the
engine compartment, ensure that the
selector lever is in neutral N
and that
the parking brake is applied.
Whatever the circumstances, you must
manually apply the parking brake when
parking, if automatic operation has
been deactivated.
With the ignition on, the flashing of
A or
AUTO
, accompanied by an audible signal and
a message, indicates a malfunction of the
gearbox.
Operating fault
Have it checked by a CITROËN dealer or a
qualified workshop.
in the event of a battery failure, use the
chock to immobilise the vehicle.