C
D
III
143
B o o T
-
L U G G A G E C o V E R B L i N d - G R A N d C 4 P i C A S S o
Position 2 : (continued)
To remove the roller :
1.
Push the flap towards the seat backrest.
2.
Lift the concertina plate by grabbing it at the side,
then position it vertically.
3.
Unlock the seat by pulling the strap
G
(see « Third-row
rear seats »).
4.
Push the backrest towards the front.
5.
Proceed in reverse order to installing.
Note :
you can position the concertina plate vertically
to lodge a bulkier object in the boot well.
Position 3 : (7-seat configuration, stowage
position)
To install the roller :
1.
Remove the blind from its current position.
2.
Position the roller, with the blind pull bar upper-
most, flap downward.
3.
Engage the lug on the left of the roller in notch
C
.
4.
Pass the right-hand side above the third-row armrest.
5.
Engage the lug in notch
D
.
To remove the roller :
- Proceed in reverse order to installing.
