103
(2) Detection accuracy
●
The detection accuracy of marker position is +/-0.75mm.
(3) Setting
●
Use it in page mode printing (ESC~L).
●
Set the paper length (= black mark length) for page length.
●
Make sure that print data fall within a printable area.
●
Add ESC FF command at the end of print data.
(4) Error
●
If no marker is detected, the printer will stop feeding and show an error display. At this
time, if the FEED switch is pressed, marker detection will be executed again.
(5) Note
●
If the marker is right below the sensor at power-on, the printer will identify that no
paper is set.
Pull out papers once and set the papers again.
●
If the marker is right below the sensor at paper set, the printer will identify that no
paper is set and will not execute auto feeding. Cut or fold the edge of the paper and
insert the paper again.
●
Marker detection is not executed in paper feeding by pressing of FEED switch.
Therefore in such a case, if the marker is right below the sensor, the printer will
identify that no paper is set (except detection by pressing of FEED switch at a marker
detection error).
●
When a mark paper is used while the black mark operation setting is disabled, and if
the sensor detects the marker, the printer will identify that no paper is set.
●
When the mark position is detected properly, unprinted data, if any, will be deleted.
●
If the mark position is not detected properly and a marker detection error is indicated,
unprinted data will not be deleted. Note that unprinted data will be printed when the
mark position is detected next time.
(6) Command
●
Can specify the marker detection level of the sensor using a command (ESC~e).
●
Can specify the mark width of the mark paper to be used using a command (ESC~e).
●
Can adjust the top of form from the point of marker detection using a command
(ESC~B). Default is set to the rate from the end of black mark to the cut position.
●
Be sure to set the values in a manner that “top of form from the point of marker
detection” is greater than “mark width”.
Содержание PD-24
Страница 6: ...6 Citizen original command ...
Страница 53: ...53 ESC P Emulation Command ...
Страница 106: ...106 HT 64 LF 54 SI 77 SO 78 VT 65 ...
Страница 127: ......