Citizen PD 22 PD-22 PD-22, Справочник по командам

Страница: 43 / 100

43
Sets the serial data length: n=1
● Sets the data length in cable interface connection.
m=0 : 8 bit data length
1 : 7 bit data length
Sets the serial stop bit length: n=2
● Sets the serial stop bit length. in cable interface connection.
m=0 : 1 stop bit
m=1 : 2 stop bit
Sets the serial parity bit: n=3
● Sets the parity bit in cable interface connection.
m=0 : parity bit unavailable
1: Even Parity
2 Odd Parity
Serial interface flow control: n=4
● Sets the flow control in cable interface connection.
m=0 : XON/XOFF control
m=1 : DTR/DSR control
Sets the printing density: n=5
● Sets the default value of printing density.
m=0: Density 0
m=1: Density
− 1
m=2: Density − 2
m=3: D1
m=4: D2
Sets the type of printing paper: n=6
● Sets the default setting for the type of printing paper.
m=0: Specifies normal paper
m=1: Specifies 2 pieces of carbon paper
m=2: Specify the label paper
Setting the operation for automatic feed: n=7
● Sets the enabling/disabling of automatic feed.
m=0: disabled
m=1: enabled
Setting the black mark detection:n=8
●
Sets the
enabling/disabling of
Marker detection.
If auto feed setting is set to enable at the same time, mark
detection will be executed during auto feeding as well.
m=0: disabled
m=1: enabled
Setting the character set: n=9
● Sets the default character set.