Citizen JM0 Series, Инструкция по эксплуатации

Страница: 7 / 24

6
•The setting procedure of the ALARM time is the same as that of the TIME
display. Setting order is as follows: ALARM→HOURS→MINUTES
•The HOURS display will synchronize with the selection of 12 or 24-HOURS in
the TIME adjustment.
•If the watch is left in the adjustment mode for more than 1 minute without
operating any button, AUTO RETURN will activate to return to the normal
ALARM display.
•INSTANT MANUAL RETURN to the normal ALARM display can be made at
any stage of adjustment by pressing
M
button.
•Press
R
button in the normal ALARM mode to set "ON" or "OFF" the alarm.
The ALARM set mark ( ) will be indicated.
•ALARM sounds for 20 seconds at the ALARM set time. Alarm buzzer can be
ceased by pressing any button.
Setting and using the alarm